IMG_7671.JPG

FFP3 NR WV NR 101

INSTRUCTIONS FOR USE

M2K MASK

Instructions for Use (DISPOSABLE MASK FFP3 NR WV NR 101)

IMPORTANT: Before use read the below instructions.

Use For: The filtering half-mask is a complete respiratory protection equipment and is intended to protect the user against the harmful effects of air pollution in the form of solid and/or liquid particles forming aerosols (dusts, fumes and mists). FFP3 mask can be used for the entire shift by one person. Do not use for gases and vapors, oil aerosols, or sandblasting; particulate concentrations that exceed either 10 times the occupational exposure limit or applicable government regulations which is lower.

 

Before use: • Before each use, check the date of storage of a half-mask and the technical condition whether a half-mask has no visible mechanical damage, is not contaminated or incomplete. A damaged half-mask and the one whose storage data has been exceeded cannot be used. Before wearing the mask, you should wash your hands. • The user must be acquainted with the equipment, its purpose and the rules of use •  Before using a half-mask, the type and concentration of the aerosol(-s) in the workplace air must be known.

Warnings: • Avoid touching the inside of the mask with your hands • Before wearing the mask, you should wash your hands. •This mask is not washable • This mask cannot be reusable • Unused masks should be stored in a clean environment • When you feel the breathing resistance increases significantly , or when the mask becomes dirty and damaged, the mask should be replaced as soon as possible• Masks cannot be sterilized in a microwave oven • having a beard, stubble, or mutton chops can interfere with the protection provided by the mask

 

 

 

 

 

Storage, maintenance and transport: • Half-masks should be stored in undamaged, closed manufacturer's packaging, i.e. plastic bags or cardboard boxes in rooms with relative humidity below 90% and temperature from -20o C to +40o C •The maximum storage time under the required conditions is 36 months •- Half-masks should be protected from direct sunlight, heat, aggressive chemical substances, moisture, dirt and mechanical damage •Half-masks can only be transported under the required storage conditions and in the manufacturer's packaging • The correct packaging for the safe transport of filtering half-masks is only the manufacturer's packaging (individual or collective

How to Wear: Open the mask with the bridge of the nose on top. After wearing, press the bridge of the nose tightly. It is very important to press the nosepiece firmly to the nose bridge to form a good seal.

MANUFACTURER: MKTEKS MENSUCAT TEKSTIL SAN. VE TIC. LTD. STI

ADDRESS: ANKARA, TURKEY

EMAIL: info@mkmedicaltextile.com

Phone: +90 532 203 77 74

www.mkmedicaltextile.com